Contact Us

Service is a key component of our corporate standard of excellence - and it's what truly sets us apart from our competition. We're here to work with you and be the manufacturing partner you need, every step of the way.

Sales

Tech Support

Locations & Directions

Brief description:
Natel headquarters houses administrative offices, customer service, design engineering and highly automated Hybrid, MCM, and COB manufacturing. The facility is MIL-PRF-38534 (Class H & K) and AS9100 certified.

A second Chatsworth facility building (next to current one) adds approx. 40,000 sq. ft. of capacity.

Manufacturing operations include:

• PTH assembly
• SMT assembly
• System assembly
• MCM assembly
• Hybrid assembly
• Testing and screening

Directions (from LAX area) – 33 miles/45-120 minutes

Take the San Diego I-405 Freeway NORTH to the Ventura US-101 Freeway. Go WEST on the Ventura US-101 Freeway for approximately 12 miles to the Canoga Avenue off ramp. TURN RIGHT and head north on Canoga Avenue for approximately eight miles. You will pass a signal intersection at Nordhoff Street after 7.5 miles. TURN LEFT at the first street past Nordhoff, which is called Prairie Street. TURN RIGHT at the four-way stop sign onto Owensmouth Avenue and enter at the second entrance on the right. Natel is located at 9340 Owensmouth Avenue.

Directions (from Burbank Airport) – 20 miles/30-40 minutes

Start out going North on N HOLLYWOOD WAY toward BURTON AVE. Merge onto I-5 N via the ramp - on the left. Merge onto CA-118 West. Take the CA-27/ TOPANGA CYN BL exit. Turn LEFT onto TOPANGA CANYON BLVD/ CA-27. Turn LEFT onto PLUMMER ST. Turn RIGHT onto OWENSMOUTH AVE.

Personalize your driving directions to Natel Chatsworth Headquarters

Manufacturing operations include:

• LTCC
• ALN
• Thick Film
• Thin Film

Directions (from San Diego International Airport) – 35 miles/45 minutes

Take North Harbor Drive to W Laurel St, make a left. Turn right at Brant St. Merge on to I-5 N via the ramp to Los Angeles. Head north approximately 30 miles to exit 47 for Palomar Airport Rd. Turn right Palomar Airport Rd. Turn right at Palomar Oaks Way, then a quick left. Take the 2nd right onto Palomar Oaks Ct.

Directions (from John Wayne International Airport) – 58 miles/65 minutes

Turn left at MacArthur Blvd. Turn right to merge onto I-405 S/San Diego Fwy. Merge onto I-5 S. Head south approximately 45 miles. Take exit 47 for Palomar Airport Rd. Turn left on Palomar Airport Rd. Turn right at Palomar Oaks Way, then a quick left. Take the 2nd right onto Palomar Oaks Ct.

Personalize your driving directions to Natel Carlsbad Operations

Dual manufacturing location operations include:

• Hybrid Assembly
• Thick Film Substrates

Directions (from RENO/TAHOE International Airport) – 28 miles/33 minutes

Head north toward Pilot Way, continue straight onto Plumb Ln. Turn left at Matley Ln. Merge onto US-395 S via the ramp to Carson City. Exit onto US-395 S/S Virginia St toward Virginia City/Carson City/So Lake Tahoe Continue to follow US-395 S approximately 20 miles. Exit on to N Carson St/US-395 BUS S. Turn left at Hot Springs Rd.

Personalize your driving directions to Natel Carson City Operations